M12/15/18 – Condenser Microphone

Description

OVERVIEW
The MG12, MG15, and MG18 are professional miniature gooseneck condenser
microphones designed for applications such as podium, presentation, meetings
and teleconferencing. Known for their clarity, excellent sound quality and ease of
operation, the MG12/15/18 have the ability to accurately capture and reproduce
vocals from a comfortable distance.
The MG12/15/18 are characterized with a uniformly controlled cardioid polar
pattern, helping to isolate the speaker from other ambient noise in the room or on
the stage. The MG12/15/18 gooseneck mics are also available in a hypercardioid
polar pattern for tighter pattern control (see models below). With a wide frequency
range of 60 Hz – 19 kHz, the MG12/15/18 provide natural sound with exceptional
transient response.
The MG12/15/18 gooseneck system is equipped with a sophisticated dual preamp
circuitry – one circuit located in the capsule housing and the other circuit built into
the base of the XLR. This circuitry is internally balanced, insuring that the audio path
will be isolated from hum and noise. In addition, the circuitry employs protection
from RF and spurious emissions from cell phones and wireless GSM devices.
The goosenecks may be mounted with the supplied flange mount (TM1218) or with
an optional base with an internal shockmount (SMT1218R). The mics may also be
used on a standard mic stand or in conjunction with the Audix ATS10 table stand with
lighted on-off switch, ATS1 table stand with programmable switch and ATS1L with
remote logic capability.
Manufactured to very high standards and tight tolerances, the MG12/15/18 features a
machined brass body, field replaceable capsule, replaceable electronics, and a variety
of optional accessories. The MG12/15/18 operate on phantom power of 18 – 52 Volts
and are available in non-reflective black matte finish.
SUPPLIED ACCESSORIES
TM1218 – Flange table mount
WS1218 – External foam windscreen
OPTIONAL ACCESSORIES
ATS1 – Table stand with programmable switch
ATS1LP – Table stand with remote logic capability and spin phoenix connector
ATS1LX – Table stand with remote logic capability and spin XCR connector
ATS10 – Table stand
SMT1218R – Rubber insulated shockmount
DCLIP – Mic stand adapter
APS2 – Two-channel phantom power supply
Condenser
Microphone
MG12/15/18
FEATURES
• Natural accurate sound
• Modular threaded capsule(s)
• Low noise electronics, dual circuitry,
internally balanced
• RF Immunity
• Low profile design
• Tension fit design for stable positioning
APPLICATIONS
• Pulpit, podium
• Board meetings
• Video Teleconferencing
• Courtroom
REPLACEMENT CAPSULES
• CPSMICROC – Cardioid (Black)
• CPSMICROHC – Hypercardioid (Black)
• CPSMICROO – Omnidirectional (Black)
• CPSMICROS – Supercardioid (Black)